Derm by Design Roller is mixed and ready to be applied. Make sure you first shake the roller, then holding the applicator with the sponge at the top, give it a couple of pumps. Derm by Design will come out under the roller, simply roll directly on the area you want to cover, roll one layer and if necessary the second layer in a cross direction to have a even coverage. Derm by Design in the roller is thicker than the Pre Mix bottle so you may not need as many layers, but it is best not to over apply for a natural look.

Available in one of the 35 colours or your own customised colour.  Derm by Design is unlike any other camouflage product, it is a thin liquid solution of pigments that dries on the first layer of your skin without blocking your pores and is flexible.  It is totally waterproof and will not smudge onto your clothes or linens. You can apply one to three thin layers of this film to get the coverage you need. Derm by Design was designed in Australia, so it is built to handle hot and humid weather and stay in place.

The life of your Derm by Design application will vary, depending on your skin type – oily vs dry.  Derm by Design on your face we suggest no more than two layers be applied (less is best to look natural).  On the face the application should last between 24-48 hours maybe longer if you have dry skin.  On your body is where Derm by Design out last other camouflage products, two to three layers can last up to several days, especially on dry skin,

It is necessary to apply a finishing powder to seal and help keep the Derm by Design application in place.  Other mineral powders such as Blush and eye shadow can then be applied.

Derm by Design Remover is recommended to remove Derm by Design gently from your skin. Spray the remover directly onto your skin and then wipe off with a disposable cloth.  Then wash off with water any residue of the remover before reapplying a fresh application of Derm by Design.  Derm by Design needs to be applied to clean, dry skin so it can attach well to the epidermis.

Tips:

When showering please avoid using body wash that contain alcohol as this will shorten the life of your application.  Gently pat dry or air dry so you don’t exfoliate your application with the towel.

Try not to wear rough, tight clothing against your Derm by Design application to get the maximum coverage time on your skin.